N-series
Tisec Parts Feeder N-series
The N-series are Tisec's most representative bowl feeders featuring stable operation and high durability by incorporating a traditional isolated bottom and horizontal drive. The new N32 model has been added to expand the N-series range
- - Low noise.
- - No adjustment required.
- - High-speed, stable feeding.
- - Auxiliary hopper can be fitted.
- - Fastening base plate fitted as standard.
Isolated bottom construction
Since the bottom is isolated from the bowl, it does not vibrate. Only the tracks around the bowl are vibrated during operation. This design generates less noise, and keeps the vibrating mass unchanged. Thus, feed speed is always constant. In addition, an auxiliary hopper can be installed in the bowl.
Vibration system
Unlike conventional vertical drive feeders, which have high-capacity electromagnets, a horizontal drive is employed in N-series bowl feeders by evenly distributing several weaker electromagnets around the circumference so that force is distributed evenly and smoothly in the direction of vibration. Good balance in vibrational amplitude allows high-speed feeding without the need for frequent adjustments.
N series:
Model |
Rated Voltage (V) |
Rated Current (A) |
Leaf spring Angle (Degree) |
Vibration frequency (Hz) |
Mass (Kg) |
N25M1 |
100 |
3.6 |
15 |
90~130 |
52 |
N25M2 |
200 |
1.8 |
15 |
90~130 |
52 |
N25T1 |
100 |
3.6 |
15 |
90~130 |
55 |
N25T2 |
200 |
1.8 |
15 |
90~130 |
55 |
N32M2 |
200 |
2.8 |
15 |
90~130 Or 45~65 |
75 |
N32M4 |
200 |
3.5 |
15 |
90~130 Or 45~65 |
75 |
N32T2 |
200 |
2.8 |
15 |
90~130 Or 45~65 |
80 |
N32T4 |
200 |
3.5 |
15 |
90~130 Or 45~65 |
80 |
N32H2 |
200 |
2.8 |
15 |
90~130 Or 45~65 |
82 |
N32H4 |
200 |
3.5 |
15 |
90~130 Or 45~65 |
82 |
N32AM2 |
200 |
2.8 |
15 |
90~130 Or 45~65 |
75 |
N32AM4 |
200 |
3.5 |
15 |
90~130 Or 45~65 |
75 |
N32AT2 |
200 |
2.8 |
15 |
90~130 Or 45~65 |
80 |
N32AT4 |
200 |
3.5 |
15 |
90~130 Or 45~65 |
80 |
N32AH2 |
200 |
2.8 |
15 |
90~130 Or 45~65 |
82 |
N32AH4 |
200 |
3.5 |
15 |
90~130 Or 45~65 |
82 |
N40AM2 |
200 |
2.8 |
15 |
90~130 Or 45~65 |
95 |
N40AM4 |
200 |
3.5 |
15 |
90~130 Or 45~65 |
95 |
N40AT2 |
200 |
2.8 |
15 |
90~130 Or 45~65 |
96 |
N40AT4 |
200 |
3.5 |
15 |
90~130 Or 45~65 |
96 |
N40AH2 |
200 |
2.8 |
15 |
90~130 Or 45~65 |
102 |
N40AH4 |
200 |
3.5 |
15 |
90~130 Or 45~65 |
102 |